Back to top

G200 Family

MODULAR 3D SMART SCANNERS

FOR BOARD OPTIMIZATION

MULTI-POINT PROFILE SCANNER

Gocator 3D Smart Scanners

MULTI-POINT PROFILE SCANNERS

A Flexible System for Transverse Board Scanning

With the Gocator 200 series you can create a modular scanning system that allows you to mix 3D profiles, tracheid detection, and color vision. Run these systems at up to 300 feet per minute in transverse board scanning applications (edging, trimming, planing).

DOWNLOAD DATASHEET

Transverse Board Scanning

Gocator 210 3D Smart Scanner

Gocator 210

Entry-Level Multi-Point Profile Scanner
  • Fast scan rate (2 kHz / 200 FPM / 61 MPM)
  • Generates profiles at 1.1″ / 28 mm spacing 
  • Large measurement range (14″ / 356 mm) for scanning thick material

Gocator 230

High-End Multi-Point Profile Scanner
  • High-speed scanning (3 kHz / 300 FPM / 91 MPM)
  • Generates profiles at 0.3″ / 8.5 mm spacing
  • Delivers highest resolution for 3D shape

Gocaote 230 3D Smart Scanner


Gocator 250 3D Smart Scanner

Gocator 250

High-End Multi-Point Profile Scanner with Tracheid
  • High-speed scanning (3 kHz / 300 FPM / 91 MPM)
  • Tracheid for grain angle and knot detection (1.5kHz)
  • Generates profiles and tracheid at 0.3″ / 8.5 mm spacing

Gocator 205

Bolt-On Color Vision Module
  • High-speed color scanning (3 kHz / 300 FPM / 91 MPM)
  • Supports two external light bars for white LED illumination
  • Delivers 0.2" x 0.01" / 0.5 x 0.25 mm color pixels
  • For use in conjunction with Gocator 210, 230 or 250 multi-point scanners

Gocator 205 3D Smart Scanner

Get the Modular Edge.

Compact Fit

Coplanar Scanning
FOR THE MOST COMPACT AND COMPLETE DESIGN

Multi-point scanner heads detect the rising and falling edge of the board, whereas line profilers may not. Multi-point scanners use less space on the scanner frame (~4-6") whereas line profilers require more of the conveyor deck (typically 2-3').

SPEED ICON

High-Speed Profiling
ULTIMATE FLEXIBILITY

The Gocator 200 series offers onboard processing and multi-sensor networking capability to build high definition 3D data models for material optimization. From early grading of cants in the sawmill to high-speed transverse board scanning applications in the planer mill, there is a suitable model and modular combination to meet your exact needs.

Stereo Camera

Tracheid Measurement
For Grain Angle and Knot Detection

Gocator 250 scanners are able to detect and measure tracheid effect. When a laser spot is projected onto healthy tracheid wood cells, laser light is scattered into the cells in the direction of cell growth. If the wood fibre is dead (as in a knot), then the laser light does not scatter. This effect can be measured to identify good wood from defective wood and even determine grain angle.

IP67 Shield

Color Vision
FOR SURFACE DEFECT DETECTION

Color vision supports the detection and measurement of surface defects. For wood material, surface defects include knots, splits, and rot, and their size and location is key to grade-based recovery optimization. Stable illumination is provided by white LED light bars, which are strobed to maximize efficiency and lifetime.

Want to know more about this innovative modular approach?

Read our editorial on the Gocator 200 series, titled Delivering a Flexible Wood Scanning Solution*, by Terry Arden, CEO LMI Technologies, published in IFI Magazine March 2017.

READ EDITORIAL

* English version only


For more detailed product information regarding specific wood applications, we invite you to download our Wood Industry Brochure.

DOWNLOAD BROCHURE

FactorySmart® Sensors

Increase your quality and productivity with smart 3D for the factory

contact us