Go2Sensor functions.
Functions|
Function |
Description |
|
Gets the active area height. | |
|
Gets the maximum valid value for the ActiveAreaHeight setting. | |
|
Gets the minimum valid value for the ActiveAreaHeight setting. | |
|
Gets the active area width. | |
|
Gets the maximum valid value for the ActiveAreaWidth setting. | |
|
Gets the minimum valid value for the ActiveAreaWidth setting. | |
|
Gets the active area x origin. | |
|
Gets the maximum valid value for the ActiveAreaX setting. | |
|
Gets the minimum valid value for the ActiveAreaX setting. | |
|
Gets the active area z origin. | |
|
Gets the maximum valid value for the ActiveAreaZ setting. | |
|
Gets the minimum valid value for the ActiveAreaZ setting. | |
|
Adds an exposure step | |
|
Gets the sensor's active area height in system coordinates (post-calibration). | |
|
Gets the sensor's active area width in system coordinates (post-calibration). | |
|
Gets the sensor's active area x-origin in system coordinates (post-calibration). | |
|
Gets the sensor's active area z-origin in system coordinates (post-calibration). | |
|
Removes all exposure steps. | |
|
Gets the maximum value for the Dynamic Exposure setting. | |
|
Gets the minimum value for the Dynamic Exposure setting. | |
|
Enables this sensor to be used as a part of training the exposure. Only one sensor in the system may have this enabled at a time. | |
|
Enables tracking. | |
|
Gets the exposure value. | |
|
Gets the exposure delay. | |
|
Gets the maximum valid value for the Exposure setting. | |
|
Gets the minimum valid value for the Exposure setting. | |
|
Gets the exposure mode. | |
|
Get the exposure step value specified by index | |
|
Get the number of exposure steps defined | |
|
Gets the status of the exposure enabled option. | |
|
Gets the firmware version installed on this sensor. | |
|
Gets the camera region-of-interest height. | |
|
Gets the camera region-of-interest width. | |
|
Gets the camera region-of-interest x origin. | |
|
Gets the camera region-of-interest y origin. | |
|
Gets the device identifier associated with this sensor. | |
|
Get the exposure step that will be used for intensity data. | |
|
Reports whether the sensor is currently hosting the connection. | |
|
Reports whether the sensor is currenly online. | |
|
Gets the model number associated with this sensor. | |
|
Gets the transform orientation identifier. | |
|
Gets the sensor's current role within the system. | |
|
Gets the transform roll angle. | |
|
Sets the active area height. | |
|
Sets the active area Length. | |
|
Sets the active area width. | |
|
Sets the active area x origin. | |
|
Sets the active area Y origin. | |
|
Sets the active area z origin. | |
|
Sets the maximum value for the Dynamic Exposure setting. | |
|
Sets the minimum value for the Dynamic Exposure setting. | |
|
Sets the exposure value. | |
|
Sets the exposure delay. | |
|
Sets the exposure mode. | |
|
Set the exposure step that will be used for intensity data. Must be less than ExposureStepCount. | |
|
Sets the transform x-offset. | |
|
Sets the sensor's current role within the system. | |
|
Sets the tracking window height. | |
|
Sets the tracking window search threshold. | |
|
Sets the transform x-offset. | |
|
Sets the current x-resolution divider. | |
|
Sets the transform y-offset. | |
|
Sets the transform z-offset. | |
|
Sets the current z-resolution divider. | |
|
Gets the tracking window height. | |
|
Gets the tracking window height maximum limit. | |
|
Gets the tracking window height minimum limit. | |
|
Determines if tracking is enabled. | |
|
Gets the tracking window search threshold. | |
|
Gets the transform x-offset. | |
|
Gets the current x-resolution divider. | |
|
Gets the x-resolution divider option at the specified index. | |
|
Gets the count of valid x-resolution divider options. | |
|
Gets the transform y-offset. | |
|
Gets the transform z-offset. | |
|
Gets the current z-resolution divider. | |
|
Gets the z-resolution divider option at the specified index. | |
|
Gets the count of valid z-resolution divider options. |
