-
FactorySmart®Solutions
-
Factorysmart Popout Column
-
-
Leverage the power of smart 3D vision to automate your inline product quality inspection processes.
-
Smart 3D sensors offer more than standard sensors. And when your sensors are smart, your factory is smart.
-
Improve production, minimize cost and waste, and achieve better results with smart 3D technology.
-
-
-
-
-
-
-
-
Ensure correct adhesion, fastening, surface gap and flush and more—for a wide variety of component assemblies.
-
-
Gocator firmware is the mind inside the sensor—providing built-in 3D scan, measurement, and control capability with FactorySmart® features and functionality.
-
Use an online "Virtual Gocator" to perform measurements on pre-recorded data.
Get Started -
-
Achieve 100% inline quality control for a wide range of manufactured parts with varying shapes and geometric features.
-
Ensure finished products meet strict quality standards such as surface finish and sealing, and are packaged correctly and ready for shipment.
-
Add smart 3D vision to your industrial robots for guidance, flexible inspection, automated assembly, and pick-and-place capabilities.
-
-
Industry Popout Column
-
Try the interactive application graphic to see smart 3D in action in the automotive industry.
-
Try the interactive application graphic to see smart 3D in action in the consumer electronics industry.
-
Smart 3D sensors improve production through automation, inspection, and optimization across a wide range of industries.
-
Try the interactive application graphic to see smart 3D in action in the packaging industry.
-
Try the interactive application graphic to see smart 3D in action in the road & rail industries.
-
Try the interactive application graphic to see smart 3D in action in the rubber & tire industries.
-
-
-
Factorysmart Popout Column
-
Products
-
Product Left Popout Column
-
Browse industry-leading laser point and line profile sensors for scanning moving targets in generic and specialized applications.
-
Discover the latest smart 3D structured light technologies for scanning and inspection of momentarily stationary targets.
-
-
Introducing the leading 3D smart sensor on the market. Choose from a variety of 3D laser profilers and structured light snapshot sensors based on your needs.
-
Vision accelerators are a smart solution to the increased processing demands in complex quality control applications based on 3D scanning and inspection.
-
Gocator 2100
-
VGA laser line profilers
-
Low cost, entry-level 3D sensors for basic applications
-
-
Gocator 2300
-
1MP laser line profilers
-
Workhorse 3D sensors for a wide variety of applications
-
-
Gocator 2400
-
2MP laser line profilers
-
Ultra-high resolution 3D sensors for advanced applications
-
-
Gocator 2500
-
High-speed, ultra compact 3D line profilers
-
Includes new model for scanning glass and other specular surfaces!
-
-
Gocator 2800
-
Dual triangulation laser line profiler
-
Binocular sensor for scanning large objects
-
-
Gocator 3200
-
2MP stereo snapshot sensors
-
Large FOV for inspecting large parts/features
-
Robot-ready for inspection and vision-guidance
-
-
Gocator 3500
-
5MP stereo snapshot sensors
-
HIgh XY resolution for inspecting small parts/features
-
Robot-ready for inspection and vision-guidance
-
-
GoMax Smart Vision Accelerator
-
Plug-and-play sensor acceleration for faster cycle times
-
Adds massive data processing power to any Gocator®––no PC required
-
-
Gocator point profile sensors are designed for closed loop control and monitoring high speed motion behaviour.
-
Gocator line profile sensors use a projected laser line to measure cross-sectional 3D geometry of parts and material surfaces.
-
Gocator Snapshot Sensors provide full-field 3D point cloud acquisition for start/stop inline inspection applications such as flexible robotic inspection and pick-and-place.
-
-
Product Right Popout Column
-
LMI offers highly specialized 3D multi-point scanners for log and board optimization in the wood industry, and web scanning applications.
-
-
-
chroma+scan is the leading brand of 3D scanner used in saw and planer mills around the world.
-
Learn about cordsets for Power/LAN connection and I/O. Also, discover our new high flex cordsets.
-
Enter specifications for your application and the product selector will recommend the right sensor model for the job.
-
The LMI sensor networking hub, called the Master, is an advanced solution for distributing power and synchronization in a multi-sensor network.
-
Get hardware kits with everything you need to mount and operate a Gocator® 3D snapshot sensor on a UR robot arm.
-
-
Multi-point profile scanners project and image multiple laser spots from a single package, which provides multiple discrete profiles as the target moves past the scanner.
-
Blue laser 3D line profile sensors use a projected laser line to measure the cross-sectional 3D geometry of small parts and challenging material surfaces (e.g. highly specular).
-
Dual triangulation line profile sensors have two cameras to eliminate occlusions and generate complete surface scans of large objects.
-
Vision acceleration leverages massive GPU-driven compute power to take over a portion of the sensor's data processing and speed up inspection.
-
-
Product Left Popout Column
-
Pavement ProfilingGocator® is integrated into longitudinal road profiling systems to rapidly scan and collect real-time, continuous 3D data of pavement surfaces in order to determine overall Ride Quality.High-Speed, Accurate and Wide Scan WidthDelivers 5 kHz maximum profile output with a scan width of 140 mm. By acquiring data from a wide area, measurement accuracy is far superior than results achievable by single point sensors.
Workhorse 3D laser line profilers for high-speed roughness and ride quality inspection.
LEARN MOREGocator® 2342Built-In Bridging AlgorithmThis feature in Gocator® outputs a single, averaged surface height measurement for tire-to-pavement contact area in order to calculate roughness index—independent of pavement type, tining, or grooving.
Low mounting height (< 1 m) and vertical projection minimizes laser safety hazards.Vehicle Safety
-
Rutting InspectionGocator® is integrated into transverse road profiling systems to scan and help identify the formation of surface depressions within the wheel path.Scalable ArchitectureBuilt-in scalability allows for easy creation of multi-sensor networks that provide full lane coverage.
Dynamic ExposureTo handle variations in pavement surface type, Gocator’s dynamic exposure control automatically adjusts exposure based on laser signal strength to optimize data quality.
Dynamic WindowingSearching and Tracking states delivers continuous high speed sensor performance.
-
Pavement Joint FlushnessGocator® scans concrete pavement and generates profiles for use in identifying faulted/uneven sections of the road.Handles All Pavement TypesGocator® provides accurate data on all pavement types, including tined, grooved, or diamond-ground concrete and asphalt.
Gocator® 2300 Series
LEARN MOREWorkhorse 3D laser line profilers for a wide variety of inspection applicationsIn addition to 3D shape data, a 2D intensity output is provided at each point for aligning transverse profiles relative to lane markers.2D and 3D Capability
Compact and Lightweight DesignGocator’s small footprint and 0.94 k.g. weight make it ideal for fitting into tight spaces and mounting onto vehicles. A full 8 sensor system can mount onto a 2.4 m wide vehicle and weighs under 12 kg.
-
Rail ProfilingGocator® generates cross-sectional 3D profiles to measure rail head size, cant, face angle, vertical head wear, and more.Real-Time Onboard Data ProcessingBuffered, real-time processing onboard the sensor head ensures no lost or compromised data and no lag time.
Gocator® accurately identifies defects in the rail surface such as crushed head, split head, split web, horizontal/transverse cracks and fissures, square breaks, and more.Robust Defect Detection
Easy System IntegrationGocator’s compact, lightweight body and web browser-based architecture allow it to easily integrate into existing rail profiling systems.
-
Track GeometryGocator® provides high-density 3D measurements of track gauge, curvature, cross-level, surface, alignment, speed, twist, and warp.Microsecond Data SynchronizationExternal sync pulse output synchronizes profile data to external accelerometers with microsecond precision—providing technicians with a unified data source for fast and integrated acquisition, analysis, and reporting.
Gocator® is a proven 3D solution for measuring the spacing of the rails on a railway track, taken between the inner faces of the load-bearing rail.Proven Gauge Inspection
